Home/Store/Software Solutions/Porsche
Porsche 911 Turbo 992.1 GT-Flasher Stage 1 Package
+3
+2

Porsche 911 Turbo 992.1 GT-Flasher Stage 1 Package

1 000,00 €
I already have a GT-flasher v2.0 Dongle
In stock
Product Details
Brand: Gt-innovation

GT-Flasher Interface + Stage 1 Engine Software Calibration

Discover the performance potential of your Porsche 911 Turbo 992.1 with a Stage 1 engine calibration from GT-Innovation. Developed for the 580 PS 3.7-litre twin-turbo flat-six engine controlled by the Bosch MG1CP007 ECU, this package combines increased performance with smooth power delivery and everyday driveability.

Customize Your Settings

Personalize your calibration with GT-Flasher’s in-app adjustment features. Depending on your ECU software, installed calibration and vehicle equipment, available settings may include Launch Control, gearshift settings, Pops & Bangs, exhaust flap operation, traction control, ethanol content and Start/Stop behaviour.

Review the settings available for your vehicle, adjust supported parameters and flash your personalized calibration directly through GT-Flasher.

Available adjustments vary by package. Ethanol settings require a compatible fuel calibration and the appropriate hardware where applicable.

Vehicle Compatibility

  • Model: Porsche 911 Turbo Coupé and Cabriolet
  • Generation: 992.1
  • Engine: 3.7-litre twin-turbo flat-six — 3,745 cc, also commonly described as 3.8 litres.
  • Engine management: Bosch MG1CP007
  • Factory output: 580 PS / 750 Nm
  • Drivetrain: All-wheel drive.
  • Transmission: Eight-speed PDK.
  • Compatibility: Subject to confirmation of ECU hardware, software version and programming requirements.

Stage 1 Engine Calibration Benefits

Our Stage 1 calibration focuses on stronger acceleration, improved mid-range response and progressive power delivery. Calibration settings are matched to the selected fuel grade, vehicle configuration and transmission requirements.

Torque management, boost control, ignition timing and fuel delivery are considered together to achieve a coordinated performance upgrade.

Estimated Stage 1 Performance

Specification Factory Estimated Stage 1
Engine power 580 PS Approximately 700–715 PS
Engine torque 750 Nm Approximately 820–850 Nm

These figures represent estimated engine output, rather than power measured at the wheels. Actual results depend on fuel quality, vehicle specification, operating conditions and the selected calibration. Final output is subject to validation on the individual vehicle.

Power and torque depend on:

  • Fuel grade and fuel quality.
  • Selected calibration and torque configuration.
  • Engine condition and maintenance.
  • Intake, exhaust and cooling configuration.
  • Transmission specification and applicable torque limits.
  • Intake-air temperature and ambient conditions.
  • Dynamometer type and measurement method.

Use the fuel grade specified for your selected calibration. Higher-octane fuel requires a suitable calibration to take advantage of its additional knock resistance.

Calibration in Detail

Torque Management & Power Delivery

Torque requests and relevant limits are calibrated together to support the selected performance level, with attention to progressive delivery and coordination between engine and PDK transmission.

Boost Pressure & Turbocharger Control

Boost targets and associated control settings are matched to the 911 Turbo’s variable-turbine-geometry turbochargers and operating range, focusing on consistent response and controlled delivery of the requested load.

Ignition & Fuel Delivery

Ignition timing and fuelling are calibrated for the selected fuel grade and operating conditions. Fuel quality remains an essential consideration when choosing a calibration.

Throttle Response & Driveability

Pedal response and torque delivery are considered together to provide an engaging driving experience while maintaining smooth operation during normal driving.

How It Works

  1. Check compatibility: If you are unsure whether this package supports your vehicle, send us your vehicle details before ordering.
  2. Prepare your package: We confirm the appropriate GT-Flasher interface, calibration and any ECU preparation required for your vehicle.
  3. Select your calibration: Access the GT-Flasher portal and choose the calibration suitable for your vehicle, hardware configuration and fuel grade.
  4. Flash your vehicle: Follow the step-by-step guide and the programming procedure applicable to your ECU.

Product Guides & Support

Access our step-by-step guides for GT-Flasher setup, account registration, flashing, logging and diagnostics:

GT-Flasher Product Guides

Calibration selection and technical communication are managed through the GT-Flasher portal.

Motorsport Use

This software calibration is intended for motorsport and off-road applications. Customers are responsible for ensuring that its installation and use comply with the requirements applicable in their country.

Show More
Share this product with your friends
ShareSharePin it
Porsche 911 Turbo 992.1 GT-Flasher Stage 1 Package
  • My Account
  • Track Orders
  • Shopping Bag
Display prices in:EUR
Skip to main content
Gt-innovation Store
Menu

GT-Innovation 2024 - All rights Reserved.

Terms & ConditionsPrivacy PolicyReturn PolicyReport Abuse
Powered by Lightspeed