Home/Store/Software Solutions/Audi
RS3 8Y Gt-flasher stage 1/2 Flex-Fuel Ecu Exchange (+unlock)
+12
+11
+10
+9
+8
+7
+6
+5
+4
+3
+2

RS3 8Y Gt-flasher stage 1/2 Flex-Fuel Ecu Exchange (+unlock)

1 600,00 €
I already have a GT-flasher v2.0 Dongle
In stock
Product Details
Brand: Gt-innovation

GT-Flasher OBD2 Dongle + stage 1/2 Flex-Fuel Software Calibration (6 Credit) + Ecu exchange (Unlock service)

Unlock the performance potential of your Audi RS3 8Y 2.5 TFSI EA855 EVO with GT-Innovation’s in-house-developed Flex Fuel calibration.

This package includes a GT-Flasher OBD2 dongle and 6 credits for the corresponding Stage 1/2 Flex Fuel calibration through our portal. It is intended for compatible, previously unlocked ECUs that support OBD flashing.

Our Flex Fuel solution adjusts the calibration for the configured petrol/ethanol blend, combining flexible fuel strategies with integrated protection functions.

  • Applicable models: Audi RS3 8Y, 2021–2026, subject to ECU compatibility.
  • Engine codes: DNWB / DNWC / DXHA.
  • Engine management: Bosch MG1CS163 / MG1CS164.
  • Facelift restriction: RS3 8Y.5 models from 2025–2026 currently require in-house flashing; OBD flashing is not available for these versions.

Required Hardware — 980cc MPI Injectors

This Flex Fuel calibration requires a complete set of compatible 980cc MPI injectors.

The injectors must be installed before using the corresponding calibration. Please confirm the injector manufacturer and exact part number with us before purchasing or installing them, so the software can be matched to their characteristics. A nominal flow rating alone does not establish compatibility.

This calibration can operate with 98 octane or any ethanol blend . For automatic Flex Fuel operation, a compatible ethanol-content sensor and interface, such as GT-Innovation Flex-IT, are also required. Where supported, a manually configured ethanol-content option can be used with the appropriate calibration.

Additional fueling upgrades may be required depending on the ethanol blend, hardware configuration and requested output. Injectors, ethanol-sensing hardware and other supporting modifications are not included unless explicitly listed in your selected package.

Customize settings yourself :

Take tuning customization to the next level with the new GT-Flasher In-App Control Features. Adjust Launch Control, Gearshift Settings, Pops & Bangs, Exhaust Flaps, Traction Control, Ethanol Content, Start/Stop and much more directly from the app. Customize your driving experience anytime, anywhere without visiting a workshop. Customize, flash, drive.

Stage 1/2 Flex Fuel Calibration Benefits

Our calibration coordinates fuel delivery, ignition timing, boost targets, torque management and protection strategies for your vehicle’s hardware and configured fuel blend.

For automatic operation, the calibration uses the compatible ethanol-content signal to adapt the relevant strategies as the blend changes. The permitted ethanol range and performance targets are defined for your specific setup.

Performance Expectations

Performance depends on the ethanol content, petrol quality, injector specification, fuel-system capacity, supporting hardware and transmission configuration.

For reference, our petrol Stage 1/2 calibrations typically offer:

  • Stage 1/2 flex fuel calibration : 480–540 hp and 650–720 Nm.

These are reference figures, not guaranteed Flex Fuel outputs. The expected performance of your Flex Fuel setup will be confirmed according to its hardware, fuel blend and calibration requirements.

Included Custom Functions

  • Flex Fuel: Fuel-blend-dependent calibration strategies, configured for automatic ethanol sensing or supported manual ethanol-content settings.
  • Failsafe: Monitoring of configured parameters, with warnings and power reduction when defined protection thresholds are reached.
  • Gearbox intervention patch: Custom handling of applicable gearbox torque-reduction requests, depending on the transmission software and selected setup.
  • Sport-mode pops / burbles: Configurable operation through the supported driving-mode strategy.

Modifications in Detail

1. Torque Management

  • Requested and permitted torque maps matched to the hardware and selected performance level.
  • Torque monitoring and reporting coordinated with the engine calibration.
  • Fuel-blend-dependent torque targets where configured.
  • Torque-display recalibration where supported.

2. Boost Control

  • Boost targets and control parameters matched to the turbocharger, fuel blend and engine setup.
  • Coordination of requested and actual boost using the ECU’s control strategies.
  • Boost diagnostics and diverter-valve settings reviewed for the selected configuration.
  • Boost-display scaling adjusted where required and supported.

3. Flex Fuel, Fueling & Lambda

  • MPI calibration matched to the approved 980cc injectors, including the relevant injector-characterisation settings.
  • DI/MPI fuel distribution coordinated for the hardware and operating conditions.
  • Fuel quantity, lambda targets and enrichment strategies calibrated for the configured petrol/ethanol range.
  • LPFP control and HPFP pressure-control settings reviewed according to fuel-system capacity.
  • Injection timing and operating limits matched to the selected setup.
  • Starting, warm-up and transient fueling adjusted for the configured fuel strategy.

Software adjustments do not replace the need for sufficient mechanical fuel-system capacity.

4. Ignition & Protection Strategies

  • Ignition calibration matched to petrol quality, ethanol content and hardware.
  • Fuel-blend-dependent ignition strategies where configured.
  • Knock-control and component-protection strategies coordinated with the calibration.
  • Configured failsafe responses for monitored operating conditions.

5. Sound Options

Depending on the selected package and vehicle configuration:

  • Emotion Start adjustments.
  • Configurable overrun pops and burbles.
  • Driving-mode-dependent sound settings.
  • Gearshift and launch-control sound adjustments.

6. Exhaust & Thermal Management

  • Calibration matched to the declared exhaust configuration and supporting hardware.
  • Relevant exhaust-temperature and thermal-management strategies reviewed for the setup.
  • Cooling-related settings adjusted where appropriate.

Please provide full details of your catalyst, GPF/OPF and exhaust configuration before calibration preparation.

7. Speed & RPM Limits

  • Vmax settings adjusted according to the selected package.
  • Engine-speed limits matched to the mechanical setup and transmission capabilities.
  • Neutral/Park RPM limits configured where applicable.

8. Optional Settings

  • Start/Stop default behaviour.
  • Exhaust-flap control.
  • Throttle-response adjustments.
  • Launch-control settings.
  • Additional supported in-app customization.

Factors Affecting Results

  • Petrol quality and actual ethanol content.
  • Correct installation and specification of the 980cc MPI injectors.
  • Ethanol-sensor installation and signal accuracy for automatic operation.
  • LPFP, HPFP and overall fuel-system capacity.
  • Turbocharger, intake, intercooler and exhaust hardware.
  • Engine condition.
  • Selected torque and boost options.
  • Ambient conditions and dynamometer type.
  • Transmission software and torque limits.

DYNOMODE activation through OBD11 or VCDS is mandatory for dynamometer testing where applicable to the vehicle’s test procedure. Suitable DSG software may be required to achieve the intended output.

How It Works

  1. Confirm compatibility. Send us your model, year, ECU identification, current modifications and intended fuel setup.
  2. Confirm and install the required hardware. Your approved 980cc MPI injectors must be installed, together with compatible ethanol-sensing hardware if automatic Flex Fuel operation is selected.
  3. Connect GT-Flasher. Plug the dongle into the OBD2 port and identify the vehicle using the Windows, iOS or Android application.
  4. Complete extended identification. Use the Tools section to provide the ECU information needed to prepare the correct software.
  5. Receive your calibration. We match the file to your ECU software, injectors, fuel strategy and declared hardware.
  6. Flash and log. On compatible, previously unlocked ECUs, flash through OBD and record the requested logs for review.

This package does not include an ECU exchange or unlock service unless separately specified. Facelift versions requiring in-house programming must be arranged with us before purchase.

Further Information

Learn more about our platform: https://www.gt-innovation.de/wordpress/news/4053/

Product guides and documentation: https://portal.gt-innovation.com/guides

Motorsport Use

This software calibration is intended exclusively for motorsport and racing applications. It is designed for off-road use and may not comply with local emissions or road-use requirements.

The customer is responsible for ensuring that the vehicle, hardware modifications and intended use comply with applicable regulations. GT-Innovation assumes no responsibility for use outside the product’s intended motorsport purpose.

ECU Software References

Supported software families include, subject to individual version verification:

  • 8Y0907404
  • 8Y0907404A
  • 8Y0907404B
  • 8Y0907404C
  • 8Y0907404D
  • 8Y0907404E

Additional versions are available. Please confirm your exact ECU software before ordering


Show More
Share this product with your friends
ShareSharePin it
RS3 8Y Gt-flasher stage 1/2 Flex-Fuel Ecu Exchange (+unlock)
  • My Account
  • Track Orders
  • Shopping Bag
Display prices in:EUR
Skip to main content
Gt-innovation Store
Menu

GT-Innovation 2024 - All rights Reserved.

Terms & ConditionsPrivacy PolicyReturn PolicyReport Abuse
Powered by Lightspeed